EV Charging
EV Chargers
Electric car charging made simple. Charge point installation for homes, workplaces and managed sites — surveyed, installed, certified and maintained by our own NAPIT-registered engineers.
Domestic
Home charging, fitted properly.
Most homes take a single 7kW charge point on the driveway or garage wall, and the difference between a good install and a poor one is nearly all in the preparation.
We start by checking the incoming supply, the earthing arrangement and the spare capacity in your board, then agree where the unit and the cable run should sit before anything is drilled. Where the consumer unit or earthing needs bringing up to standard, we do that as part of the same visit rather than leaving you with a second job to arrange.
Cabling is routed discreetly in proper containment so the finish looks like it was always meant to be there. Once it's live we test and certify the installation, notify your DNO, and set the unit up on your app and energy tariff so it's charging off-peak from day one.
Charge Points
The units we install
Every installation is designed around your property, your car and your tariff, which is why we recommend a survey before recommending a unit. These are the charge points we fit most often.
Ohme
Compact, discreet and one of the smartest units on the market. Ohme talks directly to your energy tariff and charges automatically during off-peak hours, so the car is full and the bill is lower without you thinking about it. Tethered Home Pro or untethered ePod, both with dynamic load balancing.
Zappi
The obvious choice if you have solar. Zappi can charge the car from surplus generation, grid supply or a blend of both, and the app lets you schedule and monitor every session. Compatible with all Type 2 vehicles and available tethered or untethered.
Hypervolt
A sleek unit with built-in cable management that keeps the wall tidy. Tariff syncing, smart-home integration and a fixed cable make it a clean, low-fuss install for most domestic driveways and garages.
Commercial
Workplace, fleet and communal charging.
From a couple of bays at a small office to phased rollouts across a portfolio.
Commercial charging lives or dies on the supply. We assess what the incoming capacity will genuinely support, design the distribution and load management around it, and phase the installation so you can add bays later without pulling the scheme apart. Three-phase and 22kW units, groundworks, trenching, bollard mounting and containment are all handled in house.
Where charging needs monitoring or billing, we integrate the units with a back-office platform so usage and revenue are visible. And because we already carry out fixed wire testing, fire and emergency lighting work, the charge points can sit on the same planned maintenance and reactive callout cover as the rest of the site.
Why Propcare EFS
An electrical contractor first.
NAPIT Registered
Every charge point installed and certified to BS 7671 and the IET Code of Practice.
Any Major Brand
Ohme, Hypervolt and Zappi supplied and installed — or your own unit fitted.
Home to Portfolio
Single driveways through to multi-bay commercial and communal parking schemes.
Our Own Engineers
Directly employed, never subcontracted, with a tidy finish on every install.
Enquire
Speak to us about EV charging
Tell us the property, the supply and how many bays you need and we'll come back with a survey slot and an indicative price.
Free site survey for multi-bay and commercial installations.
Same-day acknowledgement on enquiries received before 4pm.
Maintenance cover available alongside your other compliance.
Danny Watson
Co-Owner / Director — Propcare EFS
Direct line — replies within one working day.